Cisco New Zealand ADSL Configurations
IFM supplies network engineering services for $NZ150+GST per hour. If you require assistance with designing or engineering a Cisco network - hire us!
These configurations are designed for:
- Cisco 871, 871W, 877, 877W
- Cisco 851, 851W, 857, 857W
- Cisco 837
- Cisco SOHO97
- Cisco 827H
- Cisco 827
Cisco 851, 851W, 857, 857W, 871, 871W, 877, 877W Configuration Wizard, for Cisco's newer
800 ISR series routers. Select the options required, and it will generate you a config ready to load. Supports Telecom, TelstraClear,
Woosh, and Wired Country.
Cisco 827/827H/SOHO97/837 Configuration Wizard.
IPv6 Cisco Configuration Wizard, for those people with Cisco
DSL routers wanting to start using IPv6. This wizard is not well tested.
Got a config file, but not sure how to load it onto a Cisco router?
How to do port forwarding (for sites with internal servers)
Recommended Cisco Software Versions for New Zealand
Most of the below recipes use "Cisco FastStep". "Cisco FastStep" is now an obsolete product. If you have an older router then you will find "Cisco FastStep" in the box. It and can also be downloaded from Cisco's WWW site.
Cisco ADSL configuration for basic IP
feature set
Cisco ADSL firewall configuration (which most Cisco 827's in NZ have)
Cisco ADSL firewall + PPTP configuration (to
support remote users via VPN)
Cisco Business configuration (similar to above configuration,
but more restrictive)
Cisco ADSL IPSec configuration (for site to site VPNs)
Cisco ADSL Firewall and IPSec configuration (for site to site VPNs and general Internet access)
Cisco 827H/SOHO97/837 GUI configuration (The easiest way to setup a Cisco 827H/SOHO97/837)
If you think there is a common Cisco configuration that the general Cisco community in NZ would benefit from, let me know, and I'll consider adding it to these pages.
