Cisco IPv6 Config Wizard for New Zealand

IFM supplies network engineering services for $NZ180+GST per hour. If you require assistance with designing or engineering a Cisco network - hire us!

This config wizard is designed to generate IPv6 configurations for Cisco routers connecting using 6to4 for Cisco DSL routers. You MUST have a static public IP address to use this script.

Note: This page uses client side Javascript. It does not transmit any information entered to IFM.

Note: This config has only been tested using the software c837-k9o3sy6-mz.123-11.T3.bin.

Page Last Modified: 28 February 2005

Router: , Feature Set of Router: Plus
ISP Username: , Password:
Router host name: , Domain Name:
Router's Ethernet IP: . . . , Router's Local Netmask: 255.255.255.0
Router's Public IPv4 Address: . . .
Your Email Address: , Your Company:
Service Provider:
IPv6 Relay (aka IPv6 Default Route):
Enable IPv4 DHCP

Enable remote management via telnet/SSH
IPv4 Address you want to do management from: . . .
Management Username:
Management Password:
Enable Password: